Our wardrobes are perfect for designing storage space
Are made to any size depending on the destination. They can be long, short, wide or shallow. Their thickness is determined by the thickness of the MFC board- usually it is 18 mm, but we also mount shelves with a thickness of 28mm or 36mm depending on the project.
Metal tube with rosettes attached to the sides of the cabinet or the wall. Rods may be used for hanging short and long clothes as well as trousers and any items which can be put over a coat hanger.
Great for storing bedding and towels. The openwork structure of the basket design lets you see what's inside without sliding it out and provides excellent air circulation, so things stored in the basket stays fresh longer.
We offer chrome baskets in several widths and depths, making it easier to fit them in different wardrobe spaces. These baskets have the option of full extension and soft close.
Designed to hold up to 6 pairs of shoes, with an easy access to each pair through the slide out option. This is especially recommended for installation in closets, where there are shoes stored for the whole season and are in easy-to-access places, such as a hallway or corridor.
Belt and tie hangers
Because it is mounted to the one of the side walls, it does not take a lot of space, and the full extension option allows you to use it in very narrow space. It can accommodate approximately 11 ties and 6 belts.
Are not only practical for trousers, but also thanks to a dedicated space, it can store a brush to clean clothes or be used to store belts. Each trouser hanger can handle 8 pairs of pants, and the rods are equipped with non-slip rubber to prevent slipping clothes.
Can be used for the selection of dirty clothes or storing things for ironing. The use of canvas as the main material, allows free air circulation and the bag can be removed to clean or launder it. The laundry bag can be successfully installed in smaller areas such as the laundry and drying room, fitted wardrobes in the bedroom and in the walk-in wardrobes.
Pull down hangers are very practical for very high rooms or to assist disabled persons in reaching places they otherwise could have difficulty gaining access to.
Vertical belt and tie drawers
This is a practical pull-out box-module, consisting of a bar to hang bilateral ties and special compartments for straps. The relatively small size of the drawers allows you to install it in narrow spaces of the wardrobe.
Vacuum hose and iron holders
This is a very smart storage element of the interior. It allows you to organize the vacum storage space and safely store the hose and iron in a compact space.